Chihiros CO₂ Hose PRO 4/6 mm 2 m
Price:
€5.90
Tax included
Chihiros CO₂ Hose PRO 4/6 mm is a premium silicone hose for pressurised aquarium CO₂ systems and air pumps. Food-grade material remains soft and flexible during long-term use and changing temperatures. Its specially treated smooth surface attracts less dust, while the discreet grey finish complements modern aquascaping equipment and conceals deposits inside the hose. The two-metre hose can be cut into the sections required by the installation.
The hose connects compatible CO₂ regulators, solenoid valves, bubble counters, check valves, diffusers and external reactors. Its 4 mm internal diameter and 6 mm external diameter correspond to the standard hose size used by many aquarium CO₂ and air systems.
Flexible silicone is easier to route than conventional PVC tubing and resists becoming stiff or porous during prolonged CO₂ use.
Key features
- Premium aquarium CO₂ and airline tubing
- Suitable for pressurised CO₂ systems
- Suitable for air pumps
- Hose size: 4/6 mm
- Internal diameter: 4 mm
- External diameter: 6 mm
- Length: 2 m
- Food-grade silicone construction
- Remains flexible during long-term use
- Resistant to changing temperatures
- Smooth, soft-touch surface
- Reduced dust accumulation
- Discreet grey finish
- Easy to cut to length
- Suitable for regulators and solenoid valves
- Suitable for bubble counters and check valves
- Suitable for CO₂ diffusers and reactors
- Compatible with Chihiros U-Clip hose guides
- Product number: 11c50051
- EAN: 4043366500513
Technical information
- Product: Chihiros CO₂ Hose PRO
- Type: aquarium CO₂ and airline tubing
- Material: food-grade silicone
- Colour: grey
- Internal diameter: 4 mm
- External diameter: 6 mm
- Length: 2 m
- Surface: smooth and dust resistant
- Cut-to-length: yes
- Intended applications: CO₂ systems and air pumps
- Manufacturer: Chihiros Aquatic Studio
- Product number: 11c50051
- EAN: 4043366500513
Installation
- Confirm that all connectors accept 4/6 mm tubing.
- Close the CO₂-cylinder valve and release system pressure.
- Plan and measure every hose section.
- Cut the hose cleanly and squarely.
- Push the tubing fully onto each connector.
- Install a check valve in the correct flow direction.
- Avoid sharp bends, kinks and unnecessary hose length.
- Use a Chihiros U-Clip when routing the hose over the aquarium rim.
- Open the cylinder valve slowly.
- Check every connection for leakage.
- Adjust the CO₂ flow gradually.
- Monitor aquarium pH, the CO₂ indicator and livestock.
(muokkaa moduulissa Asiakkaan vakuuttaminen)
Fast shipping
Warranty quaranteed
12 other products in the same category
ARKA Silicone Tube (Ozon & CO2 proof) 4/6 mm - Colour: Blue - Length: 200 m (Role)
€149.90
Rated out of 5 stars based on
review(s)
Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent