Chihiros Spray System Tiny, sumutusjärjestelmä (App controlled)

Chihiros Spray System Tiny draws water from a separate reservoir and distributes it through two precision misting nozzles. The compact system automates regular spraying and helps maintain suitable humidity for tropical plants and humidity-dependent terrarium environments.

My Chihiros app control allows the misting schedule, duration, and intervals to be adapted to enclosure size, ventilation, temperature, and drying rate.

Key features

• Compact automatic misting system
• Controlled through the My Chihiros application
• Programmable misting times
• Adjustable misting duration and frequency
• Two fine-mist nozzles
• Suitable for small terrariums and plant displays
• Suitable for paludariums
• Suitable for rainforest terrariums
• Supports tropical plant cultivation
• Water-intake head with level sensor
• Five metres of PE water tubing
• Tubing cutter and connectors included
• Operating voltage: 12 V
• Power consumption: below 5 W
• Main-unit dimensions: approximately 98 × 75 × 54 mm
• EAN: 4043366501107

Package contents

• Main unit
• Power adapter
• Two misting nozzles
• Five metres of PE tubing
• Tubing cutter
• Water-intake head and level sensor
• T-connector
• Two-way connector
• Five R-type tubing clips
• Two end plugs
• Five cable ties
• User manual

The water reservoir and hygrometer are not included.

Installation and use

1. Plan the positions of the main unit, reservoir, and nozzles.
2. Keep the main unit dry and protected from splashes.
3. Install the nozzles in the upper section of the enclosure.
4. Avoid directing continuous spray at electrical equipment or animal resting areas.
5. Cut the tubing cleanly to the required lengths.
6. Push each tube fully into its connector.
7. Secure the tubing with the supplied clips.
8. Place the intake head and sensor inside a clean water reservoir.
9. Use clean, low-mineral water to reduce nozzle deposits.
10. Connect the power supply.
11. Pair the system with the My Chihiros application.
12. Run a short manual test.
13. Check all connections for leaks.
14. Begin with short, infrequent misting cycles.
15. Adjust the schedule according to measured humidity and drying rate.