Sicce AIRLIGHT 3.300

Sicce AIRLIGHT 3.300 is an external air pump designed for freshwater and marine aquariums. With a maximum airflow of 200 litres per hour, it provides effective aeration and can power a wide range of air operated aquarium equipment.

Air bubbles increase movement at the water surface and encourage gas exchange between the aquarium water and the surrounding air. Improved surface agitation helps maintain oxygen levels and supports suitable conditions for fish, invertebrates, and beneficial filter bacteria.

AIRLIGHT 3.300 is an excellent choice when an aquarium requires more powerful supplementary aeration. It is particularly useful in warm water, heavily stocked aquariums, quarantine tanks, breeding tanks, and during certain aquarium treatments. The pump can also be used with small air driven filters and other equipment requiring a steady airflow.

Two separate air outlets allow two airline tubes to be connected to the same pump. This makes it possible to operate two air stones, two bubbling ornaments, or two air driven filters. The integrated airflow control knob allows the output to be adjusted according to the aquarium size, connected equipment, and desired bubble intensity.

Stainless steel outlet connections provide a durable attachment point for the airline tubes. Transparent airline tubing is included, making the pump quick and convenient to install. Air stones and other accessories can be selected separately according to the intended application.

AIRLIGHT 3.300 is designed for quiet operation. Vibration damping rubber feet reduce the transfer of vibration to aquarium cabinets, shelves, and other surfaces. The pump can be placed on a stable horizontal surface or attached vertically using the integrated wall mounting hook.

An internal indicator light shows when the pump is operating. This practical feature makes it easy to check the operating status at a glance. The compact design also allows convenient placement near the aquarium.

With a power consumption of only 4 watts, AIRLIGHT 3.300 is an energy efficient option for continuous aeration. It operates at 230 or 240 volts and a frequency of 50 hertz.

Key features

• Powerful aquarium air pump
• Maximum airflow of 200 litres per hour
• Low power consumption of 4 watts
• Two separate air outlets
• Adjustable airflow
• Stainless steel outlet connections
• Designed for quiet operation
• Vibration damping rubber feet
• Integrated operating indicator light
• Wall mounting option
• Suitable for air stones and bubbling ornaments
• Suitable for air driven filters
• Suitable for freshwater and marine aquariums
• Designed for external installation
• Transparent airline tubing included

Technical information

• Model: Sicce AIRLIGHT 3.300
• Product type: external aquarium air pump
• Maximum airflow: 200 l/h
• Power consumption: 4 W
• Operating voltage: 230 or 240 V
• Frequency: 50 Hz
• Number of air outlets: 2
• Airflow adjustment: yes
• Installation: outside the aquarium

Installation and use

Place the Sicce AIRLIGHT 3.300 on a stable, dry, and level surface outside the aquarium. Whenever possible, position the pump above the aquarium water level to prevent water from flowing back through the airline tubes.

If the pump is installed below the water level, fit a suitable non return valve to each airline tube. A non return valve helps protect the pump from water entering through the tubing, especially during a power failure.

Connect the airline tubes to the pump outlets and install air stones, bubbling ornaments, or air driven filters at the other ends. Adjust the airflow to suit the connected equipment using the control knob.

Inspect the air stones regularly. Clean or replace them if the airflow or bubble production begins to decrease. A blocked air stone increases back pressure and may reduce pump performance.

Never submerge the pump. Keep the unit protected from water splashes and continuous moisture.