Hobby Filter sponge fine, blue 50 x 50 x 5 cm

The fine blue filter foam captures smaller particles that may pass through coarse prefilter material. Its open-cell structure also supports biological filtration by providing surface area for beneficial microorganisms.

The five-centimetre thickness creates a deep filtration layer with high dirt-holding capacity and extensive biological surface area. For the best flow and service interval, the fine foam is normally installed after coarse filter material.

Key features

• Fine blue filter-foam sheet
• Mechanical and biological filtration
• Captures coarse and fine debris
• Helps improve water clarity
• Provides surface area for beneficial bacteria
• Suitable for freshwater aquariums
• Suitable for marine and reef aquariums
• Pore density: 30 PPI
• Dimensions: 50 × 50 × 5 cm
• Thickness: 5 cm
• Can be cut to size
• Suitable for internal and external filters
• Suitable for sump chambers
• Suitable for mat filters
• Suitable after coarse prefilter material
• Washable and reusable
• Suitable for custom filtration systems
• Product number: 20465
• EAN: 4011444204653

Technical information

• Product: Hobby Filter Sponge Fine Blue
• Type: fine-pore filter-foam sheet
• Filtration: mechanical and biological
• Colour: blue
• Pore density: 30 PPI
• Dimensions: 500 × 500 × 50 mm
• Water types: freshwater and marine
• Cut-to-size: yes
• Washable: yes
• Reusable: yes
• Manufacturer: Hobby Aquaristik
• Product number: 20465
• EAN: 4011444204653

Directions

1. Measure the internal dimensions of the filter chamber.
2. Mark the required shape on the foam.
3. Cut the material with a long, sharp knife.
4. Make the piece slightly larger than the filter opening.
5. Rinse the new foam before use.
6. Install it without excessive compression.
7. Prevent water from bypassing the edges.
8. Position the fine foam after coarse filter material.
9. Check that water passes evenly through the foam.
10. Clean the material when water flow begins to decrease.
11. Rinse biologically established foam in removed aquarium water.
12. Replace the material when it becomes brittle, damaged or permanently compressed.