Exoterra membram sumugeneraattori

A replacement membrane for the Exo Terra Fogger (PT2080). A key is included.

The membrane is a wearing part: it vibrates ultrasonically and produces the fog. When fog output weakens or stops, the membrane is usually the cause.

Replacement: unplug the unit and remove it from the water container or waterfall. Open the ring nut with the supplied key, turning counterclockwise. Remove the brass washer and the old membrane; the rubber washer is best left in place. Clean chemical and mineral deposits from the ring nut and the brass washer with a soft cloth. Fit the new membrane with the black ring side facing down and reassemble in reverse order. The inside of the unit cavity must be completely dry before assembly.