Glamorca Activated Carbon Block filter

The carbon-block cartridge provides the final activated-carbon treatment before the RO membrane. Its dense carbon structure promotes even contact between the water and filter material, improving chemical pre-filtration and membrane protection.

The Glamorca RO1 uses separate standard activated-carbon and carbon-block cartridges. This carbon-block version is model LS-CBF and must be installed in the correct position.

Key features

• Original Glamorca replacement cartridge
• Designed for the Glamorca RO1
• Compressed activated-carbon block
• Reduces chlorine
• Reduces pesticides
• Reduces organic contaminants
• Reduces other adsorbable chemicals
• Helps reduce unwanted taste, colour and odour
• Protects the RO membrane from chemical damage
• Helps maintain membrane rejection performance
• Reduces the load on the DI cartridge
• Enclosed quick-change design
• Twist-lock installation
• Maximum flow approximately 1 GPM
• Typical replacement interval approximately six months
• Not washable or reusable
• Intended for aquarium-water preparation
• Product code: LS-CBF

Technical information

• Product: Glamorca Activated Carbon Block Filter
• Type: replacement carbon-block cartridge
• Compatibility: Glamorca RO1
• Filter material: compressed activated carbon
• Maximum flow: approximately 1 GPM
• Operating temperature: approximately 5–52 °C
• Operating pressure: approximately 2–5.5 bar
• Product code: LS-CBF

Replacement

1. Close the feed-water valve.
2. Disconnect the RO1 system from power.
3. Release internal pressure according to the manual.
4. Unlock and remove the old carbon-block cartridge.
5. Confirm that the replacement cartridge is model LS-CBF.
6. Install the cartridge in the correct filter position.
7. Turn it until completely locked.
8. Open the feed water slowly.
9. Check the cartridge for leaks.
10. Flush the new filter according to the system instructions.
11. Discard the initial flushing water.
12. Confirm normal flow and product-water TDS.
13. Reset the filter-service indicator where required.