Chihiros WRGB 2 Pro -vaijeriripustus

The hanging kit offers a clean alternative to mounting the WRGB II Pro directly on the aquarium rim. Suspending the light frees the glass edges for filter pipes, dosing tubes, feeding equipment, and maintenance access.

Adjusting the suspension height also changes the illumination pattern. A lower position concentrates light, while a higher position provides broader and more even coverage.

Key features

• Hanging kit for Chihiros WRGB II Pro lights
• Compatible with all WRGB II Pro sizes
• Suitable for ceiling or sturdy shelf installation
• Frees the aquarium glass edges
• Improves aquarium-maintenance access
• Adjustable mounting height
• Helps control light spread
• Includes two steel cables
• Cable length: approximately 2 m each
• Cable thickness: approximately 1.2 mm
• Strong metal construction
• Minimalist suspended appearance
• Suitable for open and rimless aquariums
• Suitable for planted and aquascaping aquariums
• LED light sold separately

Package contents

• Two steel suspension cables
• Cable adjusters and locking components
• WRGB II Pro light fittings
• Model-specific metal mounting components

Ceiling-specific screws and anchors may need to be purchased separately.

Installation

1. Disconnect the light from power.
2. Remove the original light supports.
3. Measure the distance between the suspension points.
4. Mark the corresponding ceiling or shelf positions.
5. Use anchors suitable for the supporting material.
6. Install both upper mounting points securely.
7. Attach one cable to each end of the light.
8. Connect the cables to the upper mounting points.
9. Adjust both cables to the required height.
10. Level the light horizontally.
11. Confirm that all cable locks are secure.
12. Route the power cable without placing tension on the light.
13. Create a drip loop in the power cable.
14. Check the complete installation before connecting power.
15. Inspect the cables and mounting points regularly.