Chihiros Kiinteä kiinnike WRGB 2 Pro

The fixed metal stands provide a minimalist alternative to the adjustable supports supplied with Chihiros WRGB II Pro lights. One stand is installed at each end of the light before the complete unit is positioned directly on the aquarium rim.

Unlike the original adjustable supports, the fixed stands do not extend sideways. The aquarium width must therefore match the physical length of the selected WRGB II Pro light.

Key features

• Fixed metal mounting stands
• Designed for Chihiros WRGB II Pro LED lights
• Replaces the original adjustable supports
• Two stands included
• One stand for each end of the light
• Positions the light directly on the aquarium side glass
• Stable and sturdy construction
• Black finish
• Clean and symmetrical appearance
• Suitable for open aquariums
• Particularly suitable for rimless glass aquariums
• Suitable for planted and aquascaping displays
• Installation width is not adjustable
• Aquarium width should match the light length
• LED light and aquarium sold separately

Compatibility

Confirm the exact light model and aquarium dimensions before ordering. The stands are designed for the WRGB II Pro range and should not automatically be considered compatible with WRGB II, Slim, A Series, A II, Universal WRGB, or other Chihiros lights.

Check:

• Exact light model
• Light length
• Aquarium external width
• Glass thickness
• Aquarium-rim construction
• Space required for cover glass
• Position of filter pipes and other accessories

Package contents

• Two fixed metal stands for Chihiros WRGB II Pro
• Model-specific mounting components

The LED light, aquarium, cover glass, and other accessories are not included.

Installation

1. Disconnect the light from power.
2. Remove the light from the aquarium.
3. Place it on a clean and protected surface.
4. Remove the original adjustable legs.
5. Install one fixed stand at each end.
6. Use only the supplied or manufacturer-approved mounting components.
7. Tighten the fittings evenly without overtightening.
8. Clean the aquarium rim.
9. Position the light carefully on the aquarium side glass.
10. Centre the light above the aquarium.
11. Confirm that both stands are stable.
12. Route the power cable without pulling the light sideways.
13. Create a drip loop in the cable.
14. Inspect the stands and fittings regularly.